Reusing Rcd Times on a split load board with iCertifi

When testing circuits the blue toggle is ready to save both RCD times (1x and 5x).  times can be saved to either A or B side.

IMG_1106

 

After inputting RCD times in the relevant input box,  tapping the segment will save BOTH times to your chosen side. Repeat for the other RCD.

On successful saving, RCD times are displayed within the segment.  These values can be added to new circuits for the current electrical certificate circuit by simply tapping the required times in the segment.

RCD Times can be deleted allowing new values to be saved by tapping Clear A or B under the consumer unit graphic